|
|
Plastic
Calender Production line(be applicable to film,sheet and
leather etc)
| |
|
| 一、Calander main unit | |
| | 二、Basic
series of calender |
| Roll diameter（mm) |
Typical lay-out of rolls | Working
surface length(mm) | Model of drive |
| ￠ 300 |
Five-roll | 900 | A
and B | | ￠ 400 |
Four
-roll
Five- roll
Six- roll
| 1100、1200 | A、B |
| ￠ 360 |
Four
-roll | 1200、1300 | A、B |
| ￠ 450 |
Four-
roll
Five -roll
Six-roll
Eight-roll |
1400、1500 | A、B |
| ￠ 510 |
Four-
roll
Five -roll
Six -roll | 1680 | A、B |
| ￠ 560 |
Four
-roll
Five -roll
Six -roll | 1680、1800、1880、1730 | A、B |
| ￠ 570、610 |
Four-
roll | 1800 | A、B |
| ￠ 610 |
Four-
roll
Five- roll
Six -roll | 1730、1830、1900、2030 | A、C |
| ￠ 660 |
Four-
roll
Five- roll | 2130、2400、2500 | A |
| ￠ 710 |
Four
-roll
Five -roll | 2300、2500 | A |
| ￠ 760 |
Four
-roll | 2500、2800 | A |
| ￠ 810 |
Four -roll |
3000 |
A |
| ￠ 860 |
Four -roll |
4000 |
A |
| Notes：（1）Customers may choose the suitable
ratio of length and diameter according to their requirements of production. |
| （2）Model of drive A | A
electromotor drives a roll singly | |
| Model of drive B | Drive
for combination reducing gear | | Model
of drive C | Drive for "Y"
form gear | | （3）The power
can be chosen when customers place the order. | | （4）Auxiliary
machine will be set according to different typies of calender. |
| （5）All Four-roll arrangement is “ Γ
” form；Five- roll arrangement is “L”and“ Γ ” form；Six -roll arrangement is “M”form. |
| （6）Size
picture | |
|
Plastics Calender Production line 
